Here I made a Motorcycle Shell Garage, using PVC pipe and a Tarp.
Step 1: PVC Pipe
I took PVC pipe with T connectors and elbows. I made 5 U shapes.
Step 2: T Connectors
I used 5 connectors and a lawn tractor hitch to connect to the support rails. I trimmed the ends off flush.
Step 3: Cut And Sew Tarp
Cut and Sew the tarp in sections to fit the pipe.
Step 4: Sew For PVC Pipe
Sew 3 inches along edges of tarp at all the places where the pipe will fit inside.